User's Manual

Trimble TS635 Construction Total Station User Guide 97
Menu Screen 5
1. Do one of the following:
– In the XYZ screen, use [^] or [v] to highlight
the record to edit. Then select the
Edit
softkey.
– In the detailed data screen, select the Edit
softkey.
2. Use
[^] or [v] to highlight a field. Then modify the value in the selected field.
3. When you have finished editing, press
[ENT] in the CD field.
A confirmation screen appears.
4. Do one of the following:
– To accept the changes and return to the data view screen, press [ENT] or
select the
Yes softkey.
– To go back to the edit screen, press [ESC] or select the No softkey.
Searching coordinate records
You can search for records by their type, point name, code, or by any combination of
these values.
In the XYZ screen, select the
Srch softkey to access the
XYZ data search function.
To search for a record by point name, enter the point
name in the PT field and press
[ENT] twice.
You can use the asterisk (*) as a wildcard. For example,
when you enter
500* in the PT field, the search matches the points named 500, 500-1,
500-A, and 5000.
To search for a record by point type, move to the Type
field and use
[<] or [>] to change the selected point type.
The options are ALL, MP, UP, CC, and RE.
• If more than one point matches the search
criteria, the matching points are displayed in a
list.
Use
[^] or [v] to highlight the required point. Press [ENT] to select it.
Detailed data for the selected record appears. Select the
DSP softkey to change the
fields shown.
Press
[ESC] to return to the list.