User's Manual

5 Menu Screen
102 Trimble TS635 Construction Total Station User Guide
B
Tip – To quickly access the DSP settings screen, hold down [DSP] for one second.
Calibration
Use the Calibration screen to calibrate the instrument if
required. To access the Calibration screen, press
[6] or
select
Calibrat from the MENU screen.
See also Adjusting the calibration, page 106.
Time
Use the Date & Time screen to set the current date and
time.
1. Press
[7] or select Time on the MENU screen. The
Date & Time screen appears.
The current date and time settings are displayed.
2. Enter the date in Year-Month-Day format. For example, to change the date to
August 15, 2006 press [2] [0] [0] [6] [ENT] [8] [ENT] [1] [5] [ENT].
If the highlighted part of the field ( for example, the year) is already correct, press
[ENT] to use the current value. For example, if the date is already set to August 20,
2006, and you want to change the date to August 25, 2006, press
[ENT] [ENT] [2] [5]
[ENT]
.
3. To move to the Time field, press
[ENT] from the
Date field:
4. Enter the time in 24-hour format. For example, to
set the time to 4:35 PM, press
[1] [6] [ENT] [3] [5] [ENT].
5. Do one of the following:
– To finish setting the date and time, press [ENT] in the Minutes field.
– To cancel the changes, press [ESC].