User's Manual

3 Getting Started
24 Total Station Nivo Series Instruction Manual
Turning the Instrument On and Off
Turning on the instrument
1. To turn on the instrument, press [PWR]. The start-
up screen appears. It shows the model name,
current temperature, pressure, date, and time.
The display automatically changes to the
electronic level after 2 seconds.
Turning off the instrument
To enter the power-off process, press [PWR] and [ENT].
Then do one of the following:
Sleep mode
If you press the
Sleep softkey in the Press [ENT] →
OFF screen, or enable the Power Save setting (see
Power saving, page 110), the instrument goes into
sleep mode.
When the instrument is in sleep mode, it wakes up if
any of the following occurs:
• You press a key
• The instrument receives a remote control command
If you have entered your name or your company’s name in the Owner’s detail
field, the text from this field appears on the start-up screen. To set the Owner’s
detail field, go to MENU > Settings > Others. For more
information, see page 113.
Press ... To ...
[ENT] again turn off the instrument
the
Reset softkey reboot the program and re-start the instrument
the
Sleep softkey put the instrument into power-saving mode
[ESC]
cancel the power-off process and return to the previous screen
If you press the Reset softkey, the software is rebooted and the Basic Measurement Screen (BMS) appears
without an open job.