User's Manual

4 Applications

56 Total Station Nivo Series Instruction Manual

Sighting the backsight by entering the azimuth angle

1. To enter the azimuth angle to the backsight

point, press

[2] or select Angle in the Backsight

screen.

2. If there is no point name for the BS, press

[ENT]

on the BS field.

3. In the AZ field, enter the azimuth angle to the

BS point.

If you press

[ENT] without entering a value in the

AZ field, the azimuth is automatically set to

0°00'00".

4. Sight the BS point and press [ENT]. ST and F1

records are stored in the job.

Backsight point

Azimuth

Station point

(Xi, Yi, Zi)

Instrument height