User's Manual

3 Getting Started
40 Trimble TS635 Construction Total Station User Guide
Switch 1: Turning on/off the LCD backlight
Switch 2: Turning on/off the laser pointer
Switch 3: Turning on/off the sound
[DSP]
button
Use the [DSP] button to change the current display screen or to change display settings.
Switching between display screens
When several display screens are available:
• the DSP indicator appears at the top left of the
screen
• the screen indicator ( for example, 1/4) appears
at the top right
To move to the next available screen, press
[DSP].
For example, if you are currently in the second display
screen, press
[DSP] to move to the third display screen.
The screen indicator changes from
2/4 to 3/4.
When the secondary distance unit is set, an additional
screen is available. It shows the HD, VD, and SD values.
See also Other settings, page 94.
The smallest unit of display for distances measured in
feet-and-inches is 1/16 in. Smaller units are impractical
in the field.
When the actual value is greater than 99999'11"15/16, the > symbol appears. If the
actual distance is less than –9999'11''15/16, the ` (solid triangle) symbol appears. This
does not affect calculations. The precise value is used internally in all cases.
LCD backlight is on
LCD backlight is off
Laser pointer is on
Laser pointer is off
The icon appears while turning on the laser pointer. When the icon is on the screen, the
emitting power is Laser Class 2.
Sound is on
Sound is off