User's Manual

Trimble TS635 Construction Total Station User Guide 41
Getting Started 3
Customizing items in the Basic Measurement Screen (BMS)
To customize the items that are displayed on the DSP1, DSP2, and DSP3 screens:
1. Hold down
[DSP] for one second.
2. Use the arrow buttons
[^], [v], [<], and [>] to highlight
the item that you want to change:
3. Press the or softkey to scroll through the list
of items that can be displayed for this item.
The items that you can choose from are HA, AZ,
HL, VA, V%, SD, VD, HD, Z, and (none).
4. To save your changes, press the
Save softkey.
Alternatively, highlight the last item for DSP3 and press
[ENT]. The DSP screens
show the items you have selected.
Except for the (none) item, you cannot display the same item on more than one
line of the same screen.
The items displayed in the DSP1, DSP2, DSP3, and DSP4 screens are also used in
the corresponding Layout screens (LO2, LO3, LO4, and LO5).
You can also customize the displayed items in Layout.
Header characters
The following header characters appear in DSP screens:
• Colon (:) indicates that tilt correction is applied
to the value.
• Hash symbol (#) indicates that tilt correction is
off.
• Underscore (_) under the tilt correction
character indicates that Sea Level Correction or
Scale factor is applied.
[MODE]
button
The [MODE] button is on the top row of the TS635 keypad. Use it to change the keyboard
mode for the current screen.
Changing the input mode while entering points or codes
When the cursor is in a point (PT) or code (CD) field,
press
[MODE] to change the input mode between
alphanumeric (
A) and numeric (1).
The input mode indicator in the status bar changes to
show the current input mode.