User's Manual

3 Getting Started
44 Trimble TS635 Construction Total Station User Guide
Turning on the instrument
Press the [PWR] button. The start-up screen appears. It
shows the model name, current temperature, pressure,
date, and time. The display automatically changes to
the electronic level after two seconds.
If you entered your name or your company’s name in
the Owner’s detail field, the text from this field appears
on the start-up screen. To set the Owner’s detail field,
press
[MENU] and then select Settings / Other.
See also Other settings, page 94.
Turning off the instrument
1. Press [PWR] and [ENT].
2. Do one of the following:
Sleep mode
To put the instrument into sleep mode, do one of the following:
• In the Press [ENT] → OFF screen, press the Sleep softkey.
• Enable the Power Save setting. See also Power saving, page 94.
The instrument wakes up if any of the following events occur:
• You press a button
• The instrument receives a remote control command
• You rotate the alidade
• You tilt the telescope
Press... To...
[ENT] again turn off the instrument
the
Reset softkey reboot the software and re-start the instrument
access the Basic Measurement Screen (BMS) without an open
job.
the
Sleep softkey put the instrument into power-saving mode
[ESC]
cancel the power-off process and return to the previous
screen