User's Manual

4 Applications
74 Spectra Precision Focus 4 Total Station User Guide
5. Ask the rod person to adjust the target position. When the target is on the
intended position, the displayed errors become 0.000 m (0.000 ft).
Once a measurement is taken, the Cut/Fill value and Z coordinate are updated
as the VA is changed.
6. To record the point, press
[ENT]. The PT field
defaults to the specified PT + 1000.
Press
[MENU] and then select Settings / Rec.
Use the Add Constant field to specify an integer.
The integer is added to the point number that is
being laid out to generate a new number for
recording the layout point. The default value is
1000. For example, when you stake out PT3 with
an Add Constant of 1000, the default value in the
SO field (layout record) is 1003.
The display then returns to the observation
screen. Press
[ESC]. The display returns to the
PT/CD/R input screen. If you entered the
stakeout point using a single point name, the PT
defaults to the last PT + 1.
7. If you selected a point from the list, the display
returns to the list, unless all points have been
selected. Press
[ESC] to return to the point input
screen.
dHA Difference in horizontal angle to
the target point
R/L Right/Left (Lateral error)
IN/OUT In/Out (Longitudinal error)
CUT/FIL Cut/Fill