User's Manual

Spectra Precision Focus 4 Total Station User Guide 101
Menu Screen 5
Other settings
Press [8] or select Other in the Settings menu. The Others menu appears.
<<Sorry, your instructions were not clear to me - do I need to replace the table below
and the snap with the
XYZ disp defines the speed to move to the next screen after showing XYZ of the input
point.
When the secondary unit is set to a unit, an extra display screen is available in the
BMS, layout observation screens, and L–O from line screens. The extra screen shows
the HD, VD, and SD in the secondary unit.
If you select US-Ft or I-Ft, an additional settings screen
appears. Use this screen to specify whether to display
values in Decimal-Ft or Ft-Inch.
The CD Input field sets the default input mode when a
CD field appears.
In the Language field, use
[<] / [>] to open the language
screen and
[v] / [^] to select the required language. Press
[ENT] to confirm. In the Reboot confirmation screen,
press
[ENT] to restart the instrument. The instrument
reboots and displays the start-up screen in the selected
language.
The Owner’s Detail field allows you to enter your name
or the name of your company. If you enter a value in this
field, it appears when you start the Focus 4 total station.
To provide easier configuration for common regional
settings, you can quickly configure the Focus 4 total
station to a pre-set combination of default regional
settings. See also Regional configuration, page 49.
XYZ disp Fast / Normal / Slow / +ENT
2nd Unit None / Meter / US-Ft / I-Ft
CD input 123 / ABC
Language English / Russian
Owner’s Detail Up to 20 characters