User's Manual

Spectra Precision Focus 4 Total Station User Guide 81
Applications 4
Input
Choose this option from the Cogo menu to calculate and manually input coordinates.
To enter the Input menu, press
[2] or select Input from
the Cogo menu. There are three functions in this menu
for recording new coordinate points.
Azimuth+HD input
To calculate a coordinate by an angle and distance
input from the base point (P1), press
[1] or select HA+HD
from the Input menu.
Enter the base point, P1. Type the point name and press
[ENT].
Enter the azimuth, horizontal distance, and vertical
distance. Then press
[ENT].
For example, to enter 123°45'45", type 123.4545 and then
press
[ENT].
If you do not enter a value in the dVD field, the value
0.0000 is used.
A recording point screen with the calculated
coordinates appears. The PT field defaults to the last
recorded point + 1.
Press
[ENT] to store the point.
Traverse
To calculate a new point based on two defined points
and the angle, horizontal and vertical distances from
the line defined by those two points, use the Traverse
(2Pt Angle) function.
Press
[2] or select Traverse in the Input menu.