User's Manual

Spectra Precision Focus 4 Total Station User Guide 53
Getting Started 3
Entering a point from the point list
1. Select the
List softkey when the cursor is in the
PT field. A list of existing points appears.
2. Press
[^] or [v] to move the cursor to the point that
you want to use.
3. Press
[ENT].
When you return to the point input screen, the selected
point name is entered in the PT field. Add numeric or
alphabetic characters if required.
Entering a code
The CD (Code) field defaults to the last code used. You can select a different code in the
input point screen.
Codenames can be numeric or alphanumeric, and up to 16 characters long.
There are several ways to enter a code:
• Enter a code directly, see page 53
• Enter a code from the code stack, see page 53
• Enter a code from the code list, see page 54
Entering a code directly
1. To change the input mode to alphanumeric or
numeric, press
[MODE].
2. Use the keypad to enter the code.
Entering a code from the code stack
The code stack is a list of up to 20 recently used codes.
When you reboot the Focus 4 total station, the code
stack is cleared.
To enter a code from the code stack:
1. Select the
Stack softkey when the cursor is in the
CD field. The stack appears.
2. To move the cursor to the code that you want to
use, press
[^] or [v].
3. Press
[ENT].
The selected code is copied to the CD field.