User's Manual

Spectra Precision Focus 4 Total Station User Guide 69
Applications 4
BS Check
Select these options to check and reset the backsight direction.
Note – Complete a station setup before using the BS check function.
This function always refers to the backsight point from the last station (ST) record
stored in the current open job.
1. Press
[5] or select BS Check in the Stn Setup
menu.
The HA field refers to the current HA reading,
and the BS field refers to the BS in the last station
setup. Enter station coordinates for observations
without recording data.
2. Do one of the following:
– To reset the horizontal angle to the HA set in the last station setup, sight
the BS and then select the
Reset softkey or press [ENT].
– To cancel the process and return to the BMS, select the Abrt softkey or
press
[ESC].
Stakeout menu
To access the Layout menu, press [L-O] in the BMS.
To select a command from the Layout menu, press the
corresponding number key. Alternatively, press
[^] or [v]
to highlight the command and then press
[ENT].
The last function used is highlighted.
There are four layout options:
• S-O to Point, page 70
• L-O from Line, page 71
• L-O from Arc, page 72
• XYZ, page 73