User's Manual

106 Appendices
Troubleshooting
Camera displays wireless
error.
• Confirm that host and wireless
LAN adapter are on.
• Ensure that there are no
obstacles between WT-7 and
wireless LAN adapter.
• Check settings for host and/or
wireless LAN adapter and adjust
camera settings appropriately.
• In direct (access point) mode,
confirm that the computer or
smart device is not connected
to another network.
—
—
18, 65, 86
—
Camera displays
“Ethernet cable is not
connected”.
Connect Ethernet cable or select
Wireless LAN for Choose
hardware.
11, 59, 83
Memory card error
displayed.
Confirm that memory card is
properly inserted.
—
Transfer interrupted
before all photographs
are sent.
Transfer will resume if WT-7 is
turned off and then on again.
11, 20, 59, 66
USB cable disconnected
during transmission.
Reconnect the USB cable.
Do not
turn the camera off.
—
No connection is
established when the
camera URL is entered in
a web browser (http
server connections
only).
Confirm that the browser is not
using a proxy connection.
88
Problem Solution Page