User's Manual

7Introduction
Getting Ready
A Battery Level
The level of the battery inserted in the WT-7 can be determined by
connecting the WT-7 to the camera (05) and checking the battery level
using the Options > Battery info in the Network menu (091).
A Using an AC Adapter
An optional EP-5B power connector and EH-5b or EH-5/EH-5a AC
adapter can also be used to power the camera when the WT-7 is
connected. Insert the power connector as shown below.
1 Unlatch the battery-chamber cover (q).
2 Open the battery-chamber (w) and power
connector covers (e).
3 Using the power connector to keep the battery
latch pressed to one side, slide the connector in
until the latch clicks back into place (r).
4 Position the power connector so that the cord
passes through the power connector slot and
close the battery-chamber cover (t). Be sure
that the cover is securely latched.