User's Manual

11Transfer, Control, and HTTP
Ethernet Connections
Step 1: Connecting the Equipment
Before proceeding with the following steps, start the computer
and log in.
1 Insert a memory card.
Turn the camera off and insert a memory card (do not turn the
camera off or disconnect the Ethernet cable while data are
being transferred to the computer). This step can be omitted
in camera control mode (037).
2 Attach the WT-7 (0 5).
3 Connect an Ethernet cable.
Connect the Ethernet cable as shown below. Do not use force
or insert the connectors at an angle.
4 Turn the camera on.
Rotate the power switch to turn the camera on.
5 Press the power switch for about a
second to turn the WT-7 on.
Power switch