User's Manual

29Transfer, Control, and HTTP
Wireless Connections
Step 4: Network Settings
If you selected Search for wireless network, Push-button WPS,
or PIN-entry WPS in Step 6 on page 23, choose an IP address. If
you selected Direct (access point), your next step will depend on
the connection type selected in Step 4 on page 22:
• If you selected Image transfer or Camera control mode,
proceed to Step 3.
• If you selected HTTP server mode, proceed to Step 5.
1 Obtain or select an IP address.
Highlight one of the following options
and press J.
• Obtain automatically: Select this option if
the network is configured to supply the
IP address automatically.
• Enter manually: When prompted, enter an IP address and
subnet mask by pressing 4 and 2 to highlight segments
and 1 and 3 to change. Press J to proceed when entry is
complete.
A Routers
Connection to computers on other networks via a router is supported
only when HTTP server is selected.
A MAC Address Filtering
If the network uses MAC address filtering, the filter must be supplied
with the MAC address of the WT-7. After attaching the WT-7 to the
camera, choose Network > Options > MAC address from the camera
setup menu and note the MAC address.