User's Manual

59FTP
Ethernet Connections
Step 1: Connecting the Hardware
After starting the ftp server, connect the camera as described
below.
1 Insert a memory card.
Turn the camera off and insert a memory card (do not turn the
camera off or disconnect the Ethernet cable while data are
being transferred to the computer).
2 Attach the WT-7 (05).
3 Connect an Ethernet cable.
Connect the camera to the ftp server as shown below. Do not
use force or insert the connectors at an angle.
4 Turn the camera on.
Rotate the power switch to turn the camera on.
5 Press the power switch for about a
second to turn the WT-7 on.
Power switch