Owner's Manual
Table Of Contents
- Quick Start Guide
- Camera User Manual
- Restoring Default Settings
- Q&A Index
- Table of Contents
- For Your Safety
- Notices
- Supplied Accessories
- Parts & Controls
- Getting to Know the Camera
- Camera Menus
- First Steps
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- Navigating the Menus
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Lens User Manual
- Scan of CD-ROM
- Warranty
162
t
4 Choose the amount of gain.
Highlight Auto gain and press 2.
The following options will be displayed.
Highlight an option and press J.
• On: Gain is adjusted according to number
of exposures actually recorded (gain for
each exposure is set to
1
/2 for 2 exposures,
1
/3 for 3 exposures, etc.).
• Off: Gain is not adjusted when recording multiple exposure.
Recommended
if background is dark.
5 Frame a photograph, focus, and shoot.
In continuous high-speed and continuous
low-speed release modes (0 83), the camera
records all exposures in a single burst.
If On
(series) is selected, the camera will continue to record multiple exposures while
the shutter-release button is pressed; if On (single photo) is selected, multiple
exposure shooting will end after the first photograph.
In self-timer mode, the
camera will automatically record the number of exposures selected in Step 3 on
page 161, regardless of the option selected for Custom Setting c3 (Self-timer)
> Number of shots (0 227); the interval between shots is however controlled
by Custom Setting c3 (Self-timer) > Interval between shots.
In other release
modes, one photograph will be taken each time the shutter-release button is
pressed; continue shooting until all exposures have been recorded (for
information on interrupting a multiple exposure before all photographs are
recorded, see page 163).
The n icon will flash until shooting ends.
If
On (series) is selected, multiple exposure
shooting will only end when Off is selected
for multiple exposure mode; if On (single
photo) is selected, multiple exposure
shooting ends automatically when the multiple exposure is complete.
The n
icon clears from the display when multiple exposure shooting ends.