Owner's Manual
Table Of Contents
- D7100 Camera User Manual
- Where to Find It
- Memory Card Compatibility
- Q&A Index
- Quick Start Guide
- Menu Options
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Other Shooting Options
- Live View Photography
- Movie Live View
- Special Effects
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- 18-140mm Lens User Manual
- 55-300mm Lens User Manual
129
&
A Exiting Remote Control Mode
Remote control is cancelled automatically if no photograph is taken before the time selected
for Custom Setting c5 (Remote on duration (ML-L3), 0 238), Off is selected for Remote
control mode (ML-L3), a two-button reset is performed, or shooting options are reset using
Reset shooting menu.
D Assign Shutter Button
If Record movies is selected for Custom Setting g4 (Assign shutter button, 0 260), the
ML-L3 can not be used when the live view selector is rotated to 1.
A Cover the Viewfinder
To prevent light entering via the viewfinder interfering with exposure, remove the rubber
eyecup and cover the viewfinder with the supplied DK-5 eyepiece cap (0 60).
A See Also
For information on choosing the length of time the camera will remain in stand-by mode
waiting for a signal from the remote control, see Custom Setting c5 (Remote on duration
(ML-L3); 0 238). For information on controlling the beeps that sound when the remote
control is used, see Custom Setting d1 (Beep; 0 238).