Owner's Manual
Table Of Contents
- D7100 Camera User Manual
- Where to Find It
- Memory Card Compatibility
- Q&A Index
- Quick Start Guide
- Menu Options
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Other Shooting Options
- Live View Photography
- Movie Live View
- Special Effects
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- 18-140mm Lens User Manual
- 55-300mm Lens User Manual
149
t
Non-CPU Lenses
By specifying lens data (lens focal length and maximum aperture), the user can gain
access to a variety of CPU lens functions when using a non-CPU lens.
If the focal length of the lens is known:
• Power zoom can be used with optional SB-910, SB-900, SB-800, SB-700, and SB-600
flash units
• Lens focal length is listed (with an asterisk) in the playback photo info display
If the maximum aperture of the lens is known:
• The aperture value is displayed in the control panel and viewfinder
• Flash level is adjusted for changes in aperture if the flash unit supports AA (auto
aperture) mode
• Aperture is listed (with an asterisk) in the playback photo info display
Specifying both the focal length and maximum aperture of the lens:
• Enables color matrix metering (note that it may be necessary to use center-
weighted or spot metering to achieve accurate results with some lenses, including
Reflex-NIKKOR lenses)
• Improves the precision of center-weighted and spot metering and i-TTL balanced
fill-flash for digital SLR