Owner's Manual
Table Of Contents
- D7100 Camera User Manual
- Where to Find It
- Memory Card Compatibility
- Q&A Index
- Quick Start Guide
- Menu Options
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Other Shooting Options
- Live View Photography
- Movie Live View
- Special Effects
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- 18-140mm Lens User Manual
- 55-300mm Lens User Manual
53
#
3 Choose a shutter speed.
While the exposure meters are on, rotate the
main command dial to choose a shutter
speed of Bulb (A) or Time (%).
4 Open the shutter.
Bulb: After focusing, press the shutter-release button on the camera or optional
WR-1, WR-T10, or MC-DC2 all the way down.
Keep the shutter-release button
pressed until the exposure is complete.
Time: Press the shutter-release button on the camera or optional remote control,
remote cord, or wireless remote controller all the way down.
If the exposure is
started by pressing the shutter-release button on the optional ML-L3 remote
control, pictures are taken in “Time” (%) mode even when “Bulb” (A) is
selected for shutter speed.
5 Close the shutter.
Bulb: Take your finger off the shutter-release button.
Time: Repeat the operation performed in Step 4.
Shooting ends automatically
after thirty minutes.
Main
command dial
Bulb
Time