Owner's Manual
Table Of Contents
- Camera Users Manual
- Q&A Index
- Menu Options
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu / Recent Settings
- Technical Notes
- Troubleshooting
- Specs
- Index
- 28-300mm Lens Documents
- Users Manual
- Safety
- Accessories
- Parts & Controls
- Features
- Usable Cameras & Available Functions
- Focusing, Zooming, and Depth of Field
- Setting the Aperture
- Variable Maximum Apertures
- Focusing
- Vibration Reduction Mode
- Using the Lens Hood
- The Built-In Flash and Vignetting
- Recommended Focusing Screens
- Lens Care
- Specs
- Depth of Field Chart
- Warranty
- Users Manual
- Scan of CD-ROM
- Warranty
123
r
6 Check the results.
If the camera was able to measure a value for white
balance, C will flash in the control panel for about
six seconds, while the viewfinder will show a flashing
a.
If lighting is too dark or too bright, the camera may be
unable to measure white balance.
A flashing ba will
appear in the control panel and viewfinder for about six
seconds.
Press the shutter-release button halfway to
return to Step 5 and measure white balance again.
D Direct Measurement Mode
If no operations are performed while the displays are flashing, direct measurement mode
will end in the time selected for Custom Setting c2 (Standby timer, 0 227).
A Selecting a Preset
Selecting Preset manual for the White balance option in the
shooting menu displays the dialog shown at right; highlight a preset
and press J.
If no value currently exists for the selected preset,
white balance will be set to 5,200 K, the same as Direct sunlight.
Control panel
Viewfinder
Control panel
Viewfinder