Owner's Manual
Table Of Contents
- User Manual
- Reference Manual
- Table of Contents
- For Your Safety
- Notices
- Bluetooth
- Introduction
- First Steps
- Tutorial
- Basic Photography and Playback
- Guide Mode
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- More on Photography
- P, S, A, and M Modes
- Recording and Viewing Movies
- Playback and Deletion
- Connections
- Camera Menus
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- The Setup Menu: Camera Setup
- Setup Menu Options
- Reset Setup Options
- Format Memory Card
- Date Stamp
- Time Zone and Date
- Language
- Monitor Brightness
- Info Display Format
- Auto Info Display
- Auto off Timers
- Self-Timer
- Remote on Duration (ML-L3)
- Image Dust Off Ref Photo
- Image Comment
- Copyright Information
- Beep
- Flicker Reduction
- Buttons
- Rangefinder
- Manual Focus Ring in AF Mode
- File Number Sequence
- Storage Folder
- File Naming
- Location Data
- Airplane Mode
- Connect to Smart Device
- Send to Smart Device (Auto)
- Bluetooth
- Eye-Fi Upload
- Conformity Marking
- Slot Empty Release Lock
- Reset All Settings
- Firmware Version
- Setup Menu Options
- The Retouch Menu: Creating Retouched Copies
- Recent Settings
- Technical Notes
- 18-55mm Lens User Manual
- 70-300mm Lens User manual
- 35mm f/1.8G User Manual
- Camera Warranty
81More on Photography
Manual Focus
Manual focus can be used when autofocus is not available or
does not produce the desired results (0 72).
1 Select manual focus.
If the lens is equipped with an A-M, M/A-M, or A/M-M mode
switch, slide the switch to M.
If the lens is not equipped with a focus-mode switch, select
MF (manual focus) for Focus mode (0 69).
2 Focus.
To focus manually, adjust the lens
focus ring until the image displayed
on the clear matte field in the
viewfinder is in focus.
Photographs
can be taken at any time, even when
the image is not in focus.
A-M mode switch M/A-M mode switch
A AF-P Lenses
When an AF-P lens (0 252) is used in manual focus mode, the in-focus
indicator (I) will flash in the viewfinder (or in live view, the focus point
will flash in the monitor) to warn that continuing to rotate the focus
ring in the current direction will not bring the subject into focus.