User's Manual

265
d9 Optical VR (defaults to On)
On Turn vibration control on or off. This
item is available only with lenses that
support it.
Off
e Bracketing/flash
e1 Flash sync speed (defaults to 1/250 s)
1/320 s (Auto FP), 1/250 s (Auto FP),
1/250 s–1/60 s
Choose a flash sync speed.
e2 Flash shutter speed (defaults to 1/60 s)
1/60 s–30 s Choose the slowest shutter available
when the flash is used in modes P and A.
e3 Exposure comp. for flash (defaults to Entire frame)
Entire frame Choose how the camera adjusts flash
level when exposure compensation is
used.
Background only
A Fixing Shutter Speed at the Flash Sync Speed Limit
To fix shutter speed at the sync speed limit in mode S or M, select the
next shutter speed after the slowest possible shutter speed (30 s or
%). An X (flash sync indicator) will be displayed in the viewfinder and
control panel.
A Auto FP High-Speed Sync
Selecting an “Auto FP” option allows compatible flash units to be used
at the highest shutter speed supported by the camera. Auto FP high-
speed sync is enabled automatically at shutter speeds faster than the
chosen flash sync speed (
1
/ 320 s or
1
/ 250 s depending on the option
selected), allowing wider apertures for reduced depth of field even in
daylight. If the shutter-speed displays in the control panel and
viewfinder show a value equal to the flash sync speed in modes P and
A, auto FP high-speed sync will still be activated if the actual shutter
speed is even slightly faster. The information display flash mode
indicator shows “FP” when auto FP high-speed sync is active.