User Manual
Table Of Contents
- Q&A Index
- Quick Start Guide
- Menu Options
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Basic Photography and Playback
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Other Shooting Options
- Live View Photography
- Movie Live View
- Special Effects
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
99
r
5 Position the target over a white or grey area.
While D flashes in the display, use the multi selector to
position the r over a white or grey area of the subject.
6 Measure white balance.
Press J or press the shutter-release button all the way
down to measure white balance.
The time available to
measure white balance is that selected for Custom Setting
c4 (Monitor off delay) > Live view (0 238).
When Preset manual is selected for White balance in the
shooting menu, the position of the target used to
measure preset white balance will be displayed on presets
recorded during live view photography.
A Measuring Preset White Balance (Live View Photography)
Preset manual white balance can not set while an HDR exposure is in progress (0 115) or
when Record movies is selected for Custom Setting g4 (Assign shutter button, 0 260) and
the live view selector is rotated to 1.