User Manual

206
Q
Ethernet and Wireless Networks
The optional UT-1 communication unit (0 310) requires Wireless Transmitter Utility
version 1.4.0 or later (the Wireless Transmitter Utility is supplied with the UT-1; the
latest versions of the UT-1 firmware and Wireless Transmitter Utility can be
downloaded from the websites listed on page xxvi). When used with the D7100, the
UT-1 requires firmware version 1.1 or later (the firmware version can be displayed by
connecting the UT-1 and selecting Network > Options > Firmware version in the
setup menu; 0 261).
When connected to the camera via the USB cable supplied with
the camera, the UT-1 can be used to upload pictures to a computer or ftp server over
Ethernet networks or, if an optional WT-5 wireless transmitter (0 310) is connected
to the UT-1, wireless LANs.
❚❚ Available Modes
The following modes are available when the camera is connected to a network using
the UT-1 or the UT-1 and a WT-5 wireless transmitter:
For more information, see the documentation provided with the UT-1 and/or WT-5.
Mode Function
FTP upload
Upload existing photos and movies to a computer or ftp server, or
upload new photos as they are taken.
Image transfer
Camera control
Control camera from computer using Camera Control Pro 2
(available separately).