User Manual
Table Of Contents
- Q&A Index
- Quick Start Guide
- Menu Options
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Basic Photography and Playback
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Other Shooting Options
- Live View Photography
- Movie Live View
- Special Effects
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
208
Q
Printing Photographs
Selected JPEG images can be printed on a PictBridge printer (0 346) connected
directly to the camera.
Connecting the Printer
Connect the camera using the supplied UC-E6 USB cable.
1 Turn the camera off.
2 Connect the USB cable.
Turn the printer on and connect the USB cable as shown.
Do not use force or
attempt to insert the connectors at an angle.
3 Turn the camera on.
A welcome screen will be displayed in the monitor,
followed by a PictBridge playback display.
D USB Hubs
Connect the camera directly to the printer; do not connect the cable via a USB hub.
A Printing Via Direct USB Connection
Be sure the EN-EL15 battery is fully charged or use an optional EH-5b AC adapter and EP-5B
power connector.
When taking photographs to be printed via direct USB connection, set
Color space to sRGB (0 227).
D Selecting Photographs for Printing
NEF (RAW) photographs (0 66) can not be selected for printing.
JPEG copies of NEF (RAW)
images can be created using the NEF (RAW) processing option in the retouch menu
(0 282).
A See Also
See page 335 for information on what to do if an error occurs during printing.