User Manual
Table Of Contents
- Q&A Index
- Quick Start Guide
- Menu Options
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Basic Photography and Playback
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Other Shooting Options
- Live View Photography
- Movie Live View
- Special Effects
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
69
d
Using Two Memory Cards
When two memory cards are inserted in the camera, you can use the Role played by
card in Slot 2 item in the shooting menu to choose the role played by the card in Slot
2.
Choose from Overflow (the card in Slot 2 is used only when the card in Slot 1 is
full), Backup (each picture is recorded twice, once to the card in Slot 1 and again to
the card in Slot 2), and RAW Slot 1—JPEG Slot 2 (as for Backup, except that the NEF/
RAW copies of photos recorded at settings of NEF/RAW + JPEG are recorded only to
the card in Slot 1 and the JPEG copies only to the card in Slot 2).
A “Backup” and “RAW Slot 1—JPEG Slot 2”
The camera shows the number of exposures remaining on the card with the least amount of
memory.
Shutter release will be disabled when either card is full.
A Recording Movies
When two memory cards are inserted in the camera, the slot used to record movies can be
selected using the Movie settings > Destination option in the shooting menu (0 169).