Owner's Manual
Table Of Contents
- Users Manual
- Q&A Index
- Menu Options
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu / Recent Settings
- Technical Notes
- Troubleshooting
- Specs
- Index
- Scan of CD-ROM
- Warranty
80
#
3 Choose a shutter speed.
While the exposure meters are on, rotate the
main command dial to choose a shutter
speed of A.
For a shutter speed of “time” (%), select
remote control release mode (0 85) after
choosing the shutter speed.
4 Open the shutter.
Bulb: After focusing, press the shutter-release button on the camera or optional
remote cord all the way down.
Keep the shutter-release button pressed until
the exposure is complete.
Time: Press the ML-L3 shutter-release button all the way down.
5 Close the shutter.
Bulb: Take your finger off the shutter-release button.
Time: Press the ML-L3 shutter-release button all the way down.
Shooting ends
automatically after thirty minutes.
Main command dial