Owner's Manual
Table Of Contents
- Users Manual
- Q&A Index
- Menu Options
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu / Recent Settings
- Technical Notes
- Troubleshooting
- Specs
- Index
- Scan of CD-ROM
- Warranty
86
k
3 Frame the photograph.
4 Take the photograph.
Self-timer mode: Press the shutter-release
button halfway to focus, and then press the
button the rest of the way down to start the
self-timer (note that the timer will not start if the camera is unable to focus or in
other situations in which the shutter can not be released).
The self-timer lamp
will start to flash.
Two seconds before the photograph is taken, the self-timer
lamp will stop flashing.
The shutter will be released ten seconds after the timer
starts.
Remote control mode: From a distance of 5 m
(16 ft) or less, aim the transmitter on the
ML-L3 at either of the infrared receivers on
the camera (0 2, 4) and press the ML-L3
shutter-release button.
In delayed remote
mode, the self-timer lamp will light for about
two seconds before the shutter is released.
In quick-response remote mode, the
self-timer lamp will flash after the shutter has been released.
In remote mirror-
up mode, pressing the ML-L3 shutter-release button once raises the mirror; the
shutter will be released and the self-timer lamp will flash after 30 s or when the
button is pressed a second time.
Note that the remote control can not be used
to record movies; even if Record movies is selected for Custom Setting g4
(Assign shutter button, 0 248), pressing the shutter-release button on the
remote control will release the shutter and record a photograph.
To cancel shooting, select another release mode.
A Cover the Viewfinder
When taking photos without your eye to
the viewfinder, remove the DK-21 rubber
eyecup (q) and insert the supplied DK-5
eyepiece cap as shown (w).
This
prevents light entering via the
viewfinder interfering with exposure.
Hold the camera firmly when removing
the rubber eyecup.
DK-21 rubber eyecup DK-5 eyepiece cap