Owner's Manual
Table Of Contents
- Users Manual
- Q&A Index
- Menu Options
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu / Recent Settings
- Technical Notes
- Troubleshooting
- Specs
- Index
- Scan of CD-ROM
- Warranty
150
l
5 Recompose the photograph.
6 Take the photograph.
Press the shutter-release button the rest of the way down to shoot.
If desired,
additional pictures can be taken without releasing FV lock.
7 Release FV lock.
Press the Fn button to release FV lock.
Confirm that the FV lock icon (e) is no
longer displayed in the viewfinder.
D Using FV Lock with the Built-in Flash
FV lock is only available with the built-in flash when TTL is selected for Custom Setting e3
(Flash cntrl for built-in flash, 0 236).
A Using FV Lock with Optional Flash Units
FV lock is also available with optional flash units in TTL and (where supported) monitor pre-
flash AA and monitor pre-flash A flash control modes.
Note that when commander mode is
selected for Custom Setting e3 (Flash cntrl for built-in flash, 0 236), you will need to set
the flash control mode for the master or at least one remote group to TTL or AA.
A Metering
The metering areas for FV lock when using optional flash unit are as follows:
Flash unit Flash mode Metered area
Stand-alone flash unit
i-TTL 5-mm circle in center of frame
AA Area metered by flash exposure meter
Used with other flash units
(Advanced Wireless Lighting)
i-TTL Entire frame
AA
Area metered by flash exposure meter
A (master flash)
A See Also
For information on using the depth-of-field preview or A AE-L/AF-L button for FV lock, see
Custom Setting f3 (Assign preview button, 0 244) or Custom Setting f4 (Assign AE-L/AF-L
button, 0 244).