Owner's Manual
Table Of Contents
- Users Manual
- Q&A Index
- Menu Options
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu / Recent Settings
- Technical Notes
- Troubleshooting
- Specs
- Index
- Scan of CD-ROM
- Warranty
238
U
Follow the steps below to take photographs in commander mode.
1 Adjust settings for the built-in flash.
Choose the flash control mode and output level for the
built-in flash.
Note that output level can not be adjusted
in –– mode.
2 Adjust settings for group A.
Choose the flash control mode and output level for the
flash units in group A.
3 Adjust settings for group B.
Choose the flash control mode and output level for the
flash units in group B.
4 Select the channel.
5 Press J.