Owner's Manual
Table Of Contents
- Users Manual
- Q&A Index
- Menu Options
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu / Recent Settings
- Technical Notes
- Troubleshooting
- Specs
- Index
- Scan of CD-ROM
- Warranty
21
X
First Steps
Charge the Battery
The camera is powered by an EN-EL15 rechargeable Li-ion battery (supplied).
To
maximize shooting time, charge the battery in the supplied MH-25 battery charger
before use.
About 2 hours and 35 minutes are required to fully recharge the battery
when no charge remains.
1 Connect the AC power cable.
Connect the power cable. The AC adapter plug should be
in the position shown at right; do not rotate.
2 Remove the terminal cover.
Remove the terminal cover from the battery.
3 Insert the battery.
Place the battery in the battery bay as shown in the
illustration on the charger.
4 Plug the charger in.
The CHARGE lamp will flash slowly while the battery
charges.
5 Remove the battery when charging is complete.
Charging is complete when the CHARGE lamp stops flashing.
Unplug the charger
and remove the battery.
D Charging the Battery
Charge the battery indoors at ambient temperatures between
5°C–35°C (41°F–95°F).
The battery will not charge if its
temperature is below 0°C (32°F) or above 60°C (140°F).
Battery
charging
Charging
complete