Owner's Manual
Table Of Contents
- Users Manual
- Q&A Index
- Menu Options
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Live View Photography
- Movie Live View
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu / Recent Settings
- Technical Notes
- Troubleshooting
- Specs
- Index
- Scan of CD-ROM
- Warranty
23
X
Insert the Battery
Before inserting the battery, rotate the power switch to OFF.
1 Open the battery-chamber cover.
Unlatch (q) and open (w) the battery-chamber cover.
2 Insert the battery.
Insert the battery in the orientation shown (q), using the
battery to keep the orange battery latch pressed to one
side.
The latch locks the battery in place when the battery
is fully inserted (w).
3 Close the battery-chamber cover.
D Inserting and Removing Batteries
Always turn the camera off before inserting or removing batteries.
A Removing the Battery
Turn the camera off and open the battery-chamber cover. Press the
battery latch in the direction shown by the arrow to release the
battery and then remove the battery by hand.
Battery latch