Owner's Manual

II Terminating the Connection
Wi-Fi can be disabled by:
• Selecting Wi-Fi > Network connection > Disable in the
camera setup menu
• Starting movie recording
• Turning the camera
off
II Restoring Default Settings
To restore default network settings, select Wi-Fi >Network
settings> Reset network settings. A confirmation dialog will
be displayed;
highlight Yes and press@) to restore default
network settings.
B The Wi-Fi Display
While Wi-Fi is enabled, a <<r> icon will flash in
the information display. The icon will stop
flashing once a connection
has been
established and the camera is exchanging
data
with the smart device.
~ Wi-Fi
Read the warnings on pages xviii to xx before using the Wi-Fi function.
To disable Wi-Fi in settings in which its use is prohibited, select Wi-Fi >
Network connection > Disable in the camera setup menu. Note that
Eye-Fi cards can not be used while Wi-Fi is enabled and that the
standby timer will not turn off while the Wireless Mobile Utility app on
the smart device is communicating with the camera. If no data are
exchanged for about 5 minutes, the standby timer will turn off. The
camera Wi-Fi function is only available when a memory card is inserted
and can
not be used when a USB or HOM I cable is connected. To
prevent loss of power while connected, charge the battery before
enabling
the network connection.
83