Owner's Manual

176 Recording and Viewing Movies
D Recording Movies
Flicker, banding, or distortion may be visible in the monitor and in the
final movie under fluorescent, mercury vapor, or sodium lamps or if the
camera is panned horizontally or an object moves at high speed
through frame (flicker and banding can be reduced using Flicker
reduction; 0 281).
Bright light sources may leave after-images when
the camera is panned.
Jagged edges, color fringing, moiré, and bright
spots may also appear.
Bright regions or bands may appear in some
areas of the frame if the subject is briefly illuminated by a flash or other
bright, momentary light source.
When recording movies, avoid
pointing the camera at the sun or other strong light sources.
Failure to
observe this precaution could result in damage to the camera’s internal
circuitry.
The camera can record both video and sound; do not cover the
microphone (0 2) during recording.
Note that the built-in
microphone may record sounds made by the camera or lens during
autofocus and vibration reduction.
Flash lighting can not be used during movie recording.
Matrix metering is used regardless of the metering method selected.
Shutter speed and ISO sensitivity are adjusted automatically unless On
is selected for Manual movie settings (0 179) and the camera is in
mode M.