Owner's Manual

178 Recording and Viewing Movies
• Microphone: Turn the built-in or optional stereo
microphones (0 180, 333) on or off or adjust microphone
sensitivity.
Choose Auto sensitivity to adjust sensitivity
automatically, Microphone off to turn sound recording off; to
select microphone sensitivity manually, select Manual
sensitivity and choose a sensitivity.
• Wind noise reduction: Select On to enable the low-cut filter
for the built-in microphone (optional stereo microphones are
unaffected; 0 180, 333), reducing noise produced by wind
blowing over the microphone (note that other sounds may
also be affected). Wind-noise reduction for optional stereo
microphones can be enabled or disabled using microphone
controls.
A The Live View Display
The movie crop can be viewed during live
view by pressing the R button to select the
“show movie indicators”, “hide indicators”,
“framing grid”, or “show basic photo
indicators” display (0 170).
When movie
indicators are displayed, you can access the
following movie settings by pressing the P
button: movie frame size/quality,
microphone sensitivity, white balance
(0 137), Picture Controls (0 152), focus
mode (0 164), AF-area mode (0 166), wind
noise reduction, and exposure
compensation (0 129).
If On is selected for
Movie settings > Manual movie settings
(0 177) in mode M, ISO sensitivity (0 99)
can be adjusted in place of exposure compensation.
P button
Information display