Owner's Manual

376
Press the buttons together again a second time to format the
card (to exit without formatting the card, press any other button
or wait for about six seconds until C stops flashing). When
formatting is complete, the control panel and viewfinder will
show the number of photographs that can be recorded at
current settings.
Press 1 or 3 to choose monitor brightness for playback, menus,
and the information display. Choose higher values for increased
brightness, lower values for reduced brightness.
A Two Memory Cards
If two memory cards are inserted when the O (Q) and Z (Q) buttons
are pressed, the card to be formatted will be shown by a flashing icon.
Rotate the main command dial to choose a different slot.
Monitor Brightness
G button ➜ B setup menu
A Monitor Brightness
Values of +4 or higher make the monitor easier to read in bright light
but also result in yellow colors taking on a greenish cast.
Choose lower
values for accurate color reproduction.
A See Also
The option selected for Monitor brightness has no effect on the
brightness of the display during live view photography or movie live
view.
For information on adjusting monitor brightness in live view, see
page 62.