Owner's Manual
Table Of Contents
- User Manual
- Reset
- Compatible Lenses
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Wi-Fi
- Menu List
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Warranty
87
• 3D-tracking: Select the focus point as described on page 89.
In
AF-A and AF-C focus modes, the camera will track subjects that
leave the selected focus point and select new focus points as
required.
Use to quickly compose pictures with subjects that
are moving erratically from side to side (e.g., tennis players).
If
the subject leaves viewfinder, remove your finger from the
shutter-release button and recompose the photograph with
the subject in the selected focus point.
• Auto-area AF: The camera automatically
detects the subject and selects the
focus point (in the case of portrait
subjects, the camera is able to
distinguish the subject from the
background for improved subject
detection).
The active focus points are
highlighted briefly after the camera focuses; in AF-C mode or
when continuous-servo autofocus is selected in AF-A mode, the
main focus point remains highlighted after the other focus
points have turned off.
A 3D-tracking
When the shutter-release button is pressed halfway, the colors in the
area surrounding the focus point are stored in the camera.
Consequently 3D-tracking may not produce the desired results with
subjects that are similar in color to the background or that occupy a
very small area of the frame.