Owner's Manual
Table Of Contents
- User Manual
- Reset
- Compatible Lenses
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Wi-Fi
- Menu List
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Warranty
192
If the live view selector is rotated to 1, the i-button menu will contain
the items listed below.
Microphone sensitivity, Frequency
response, Wind noise reduction, and Highlight display can be
adjusted while recording is in progress.
Option Description
Image area
Choose from the DX (24×16) and 1.3× (18×12)
image areas (0 168).
Frame size/
frame rate
Select a frame size and rate (0 166).
Movie quality Choose movie quality (0 166).
Microphone
sensitivity
Press 1 or 3 to adjust
microphone sensitivity.
Both the built-in and
optional stereo
microphones are affected.
Frequency
response
Control the frequency response of the built-in
microphone or optional stereo microphones (0 274).
Wind noise
reduction
Enable or disable wind noise reduction using the
built-in microphone’s low-cut filter (0 274).
Set Picture Control
Choose a Picture Control (0 130).
The Clarity
parameter does not apply to movies.
Destination
When two memory cards are inserted, you can choose
the card to which movies are recorded (0 273).
Monitor
brightness
Press 1 or 3 to adjust
monitor brightness for live
view (note that this affects
live view only and has no
effect on photographs or
movies or on the brightness
of the monitor for menus or
playback; 0 191).