Owner's Manual
Table Of Contents
- User Manual
- Reset
- Compatible Lenses
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Wi-Fi
- Menu List
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Warranty
214
5 Frame a photograph, focus, and shoot.
In continuous release modes (0 66), the camera
records all exposures in a single burst.
If On
(series) is selected, the camera will continue to
record multiple exposures while the shutter-release button is
pressed; if On (single photo) is selected, multiple exposure
shooting will end after the first photograph.
In self-timer
mode, the camera will automatically record the number of
exposures selected in Step 3 on page 213, regardless of the
option selected for Custom Setting c3 (Self-timer) > Number
of shots (0 279); the interval between shots is however
controlled by Custom Setting c3 (Self-timer) > Interval
between shots.
In other release modes, one photograph will
be taken each time the shutter-release button is pressed;
continue shooting until all exposures have been recorded (for
information on interrupting a multiple exposure before all
photographs are recorded, see page 215).
The n icon will flash until shooting
ends.
If On (series) is selected,
multiple exposure shooting will only
end when Off is selected for multiple
exposure mode; if On (single photo)
is selected, multiple exposure
shooting ends automatically when the multiple exposure is
complete.
The n icon clears from the display when multiple
exposure shooting ends.