Owner's Manual
Table Of Contents
- User Manual
- Reset
- Compatible Lenses
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Wi-Fi
- Menu List
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Warranty
282
e Bracketing/flash
e1 Flash sync speed (defaults to 1/250 s)
1/320 s (Auto FP) Choose a flash sync speed.
1/250 s (Auto FP)
1/250 s
1/200 s
1/160 s
1/125 s
1/100 s
1/80 s
1/60 s
A Fixing Shutter Speed at the Flash Sync Speed Limit
To fix shutter speed at the sync speed limit in mode S or M, select the
next shutter speed after the slowest possible shutter speed (30 s or
%).
An X (flash sync indicator) will be displayed in the viewfinder and
control panel.
A Auto FP High-Speed Sync
Selecting an “Auto FP” option allows compatible flash units to be used
at the highest shutter speed supported by the camera (0 314).
Auto
FP high-speed sync is enabled automatically at shutter speeds faster
than the chosen flash sync speed (
1
/
320 s or
1
/
250 s depending on the
option selected), allowing wider apertures for reduced depth of field
even in daylight.
If the shutter-speed displays in the control panel and
viewfinder show a value equal to the flash sync speed in modes P and
A, auto FP high-speed sync will still be activated if the actual shutter
speed is even slightly faster.