Owner's Manual
Table Of Contents
- User Manual
- Reset
- Compatible Lenses
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Wi-Fi
- Menu List
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Warranty
368
D Vibration Reduction
Do not turn the camera off or remove the lens while vibration
reduction is in effect.
Vibration reduction is disabled while the built-in flash is charging.
When vibration reduction is active, the image in the viewfinder may
jiggle after the shutter is released.
This does not indicate a
malfunction; wait for the image in the viewfinder to stabilize before
shooting.
A The Vibration Reduction Mode Switch (AF-S DX NIKKOR 18–200mm f/3.5–5.6G ED
VR II Lenses)
The vibration reduction mode switch is used to select the vibration
reduction mode when vibration reduction is on.
• Select NORMAL to reduce the effects of vibration when photographing
from a fixed position and in other situations with comparatively little
camera motion.
• Select ACTIVE to reduce the effects of vibration when shooting from a
moving vehicle, while walking, and in other situations with active
camera motion.
Slide the vibration reduction mode switch to NORMAL for panning shots.
When the camera is panned, vibration reduction applies only to
motion that is not part of the pan (if the camera is panned horizontally,
for example, vibration reduction will be applied only to vertical shake),
making it much easier to pan the camera smoothly in a wide arc.