Owner's Manual
Table Of Contents
- User Manual
- Reset
- Compatible Lenses
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Wi-Fi
- Menu List
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Warranty
371
A Supplied Accessories for AF-S DX NIKKOR 18–105mm f/3.5–5.6G ED VR
• 67 mm Snap-on Front Lens Cap LC-67
• Rear Lens Cap
• Flexible Lens Pouch CL-1018
• Bayonet Hood HB-32
Align the lens hood mounting mark (●) with the lens hood alignment
mark ( ) as shown in Figure q and then rotate the hood (w) until
the ● mark is aligned with the lens hood lock mark (—).
When attaching or removing the hood, hold it near the symbol on its
base and avoid gripping it too tightly.
Vignetting may occur if the
hood is not correctly attached.
The hood can be reversed and mounted on the lens when not in use.
A Optional Accessories for AF-S DX NIKKOR 18–105mm f/3.5–5.6G ED VR
• 67 mm screw-on filters
• LF-1 and LF-4 rear lens caps