Owner's Manual
Table Of Contents
- User Manual
- Reset
- Compatible Lenses
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Wi-Fi
- Menu List
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Warranty
27
❚❚ Number of Exposures Remaining
The camera has two memory card slots:
slot 1 and slot 2. Slot 1 is for the main
card; the card in slot 2 plays a backup or
secondary role. If the default setting of
Overflow is selected for Role played by
card in Slot 2 (0 82) when two memory
cards are inserted, the card in slot 2 will
only be used when the card in slot 1 is
full.
The control panel shows the slot or slots
that currently hold a memory card (the
example at right shows the icons
displayed when a card is inserted in each
slot).
If the memory card is full or locked
or an error has occurred, the icon for the
affected card will flash (0 344).
The control panel and viewfinder show
the number of photographs that can be
taken at current settings (values over
1000 are rounded down to the nearest
hundred; e.g., values between 1800 and
1899 are shown as 1.8 k). If two memory
cards are inserted, the displays show the
space available on the card in Slot 1.
Slot 1
Slot 2
Control panel
Number of exposures
remaining
Control panel
Viewfinder