User Manual

192
J
5 Frame a photograph, focus, and shoot.
The camera takes two exposures when
the shutter-release button is pressed all
the way down.
“ly” will flash in
the top control panel and l u in
the viewfinder while the images are
combined; no photographs can be
taken until recording is complete.
Regardless of the option currently
selected for release mode, only one
photograph will be taken each time the shutter-release button
is pressed.
If On (series) is selected, HDR will only turn off when Off is
selected for HDR mode; if On (single photo) is selected, HDR
turns off automatically after the photograph is taken.
The y
icon clears from the display when HDR shooting ends.
D Framing HDR Photographs
The edges of the image will be cropped out. The desired results may not
be achieved if the camera or subject moves during shooting. Use of a
tripod is recommended. Depending on the scene, the effect may not be
visible, shadows may appear around bright objects, or halos may
appear around dark objects; this effect can be reduced by adjusting the
amount of smoothing.
Top control panel
Viewfinder