Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Approved Memory Cards
- Introduction
- Tutorial
- Live View Photography
- Movies
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More About Playback
- Voice Memos
- Connections
- Menu List
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Professional Technical Guide
- Table of Contents
- Custom Controls
- Taking Pictures
- Playback
- Upload
- Accessories
- Appendix
- Menu Guide
- Table of Contents
- Menu Guide
- Defaults
- The Playback Menu: Managing Images
- The Photo Shooting Menu: Shooting Options
- Photo Shooting Menu Bank
- Extended Photo Menu Banks
- Storage Folder
- File Naming
- Role Played by Card in Slot 2
- Flash Control
- Image Area
- Image Quality
- Image Size
- NEF (RAW) Recording
- ISO Sensitivity Settings
- White Balance
- Set Picture Control
- Manage Picture Control
- Color Space
- Active D-Lighting
- Long Exposure NR (Long Exposure Noise Reduction)
- High ISO NR
- Vignette Control
- Auto Distortion Control
- Flicker Reduction
- Auto Bracketing Set
- Multiple Exposure
- HDR (High Dynamic Range)
- Interval Timer Shooting
- Silent Live View Photography
- The Movie Shooting Menu: Movie Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- a1: AF-C Priority Selection
- a2: AF-S Priority Selection
- a3: Focus Tracking with Lock-On
- a4: 3D-Tracking Face-detection
- a5: 3D-Tracking Watch Area
- a6: Number of Focus Points
- a7: Store by Orientation
- a8: AF Activation
- a9: Limit AF-Area Mode Selection
- a10: Autofocus Mode Restrictions
- a11: Focus Point Wrap-Around
- a12: Focus Point Options
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- g: Movie
- The Setup Menu: Camera Setup
- Format Memory Card
- Language
- Time Zone and Date
- Monitor Brightness
- Monitor Color Balance
- Virtual Horizon
- Information Display
- AF Fine-Tune
- Non-CPU Lens Data
- Clean Image Sensor
- Lock Mirror up for Cleaning
- Image Dust Off Ref Photo
- Image Comment
- Copyright Information
- IPTC
- Voice Memo Options
- Beep
- Touch Controls
- HDMI
- Location Data
- Wireless Remote (WR) Options
- Assign Remote (WR) Fn Button
- Network
- Slot Empty Release Lock
- Battery Info
- Save/Load Settings
- Reset All Settings
- Firmware Version
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Network Guide
- Warranty
243
t
Non-CPU Lenses
Non-CPU lenses can be used in exposure modes A and M, with
aperture set using the lens aperture ring.
By specifying lens data
(lens focal length and maximum aperture), the user can gain
access to the following CPU lens functions.
If the focal length of the lens is known:
• Power zoom can be used with optional flash units
• Lens focal length is listed (with an asterisk) in the playback photo
info display
If the maximum aperture of the lens is known:
• The aperture value is displayed in the top control panel and
viewfinder
• Flash level is adjusted for changes in aperture if the flash unit
supports qA (auto aperture) mode
• Aperture is listed (with an asterisk) in the playback photo info
display
Specifying both the focal length and maximum aperture of the lens:
• Enables color matrix metering (note that it may be necessary to
use center-weighted or spot metering to achieve accurate results
with some lenses, including Reflex-NIKKOR lenses)
• Improves the precision of center-weighted and spot metering
and i-TTL balanced fill-flash for digital SLR