Owner's Manual
Table Of Contents
- User Manual
- Table of Contents
- Approved Memory Cards
- Introduction
- Tutorial
- Live View Photography
- Movies
- Image Recording Options
- Focus
- Release Mode
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Other Shooting Options
- More About Playback
- Voice Memos
- Connections
- Menu List
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- Professional Technical Guide
- Table of Contents
- Custom Controls
- Taking Pictures
- Playback
- Upload
- Accessories
- Appendix
- Menu Guide
- Table of Contents
- Menu Guide
- Defaults
- The Playback Menu: Managing Images
- The Photo Shooting Menu: Shooting Options
- Photo Shooting Menu Bank
- Extended Photo Menu Banks
- Storage Folder
- File Naming
- Role Played by Card in Slot 2
- Flash Control
- Image Area
- Image Quality
- Image Size
- NEF (RAW) Recording
- ISO Sensitivity Settings
- White Balance
- Set Picture Control
- Manage Picture Control
- Color Space
- Active D-Lighting
- Long Exposure NR (Long Exposure Noise Reduction)
- High ISO NR
- Vignette Control
- Auto Distortion Control
- Flicker Reduction
- Auto Bracketing Set
- Multiple Exposure
- HDR (High Dynamic Range)
- Interval Timer Shooting
- Silent Live View Photography
- The Movie Shooting Menu: Movie Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- Custom Settings Bank
- a: Autofocus
- a1: AF-C Priority Selection
- a2: AF-S Priority Selection
- a3: Focus Tracking with Lock-On
- a4: 3D-Tracking Face-detection
- a5: 3D-Tracking Watch Area
- a6: Number of Focus Points
- a7: Store by Orientation
- a8: AF Activation
- a9: Limit AF-Area Mode Selection
- a10: Autofocus Mode Restrictions
- a11: Focus Point Wrap-Around
- a12: Focus Point Options
- b: Metering/Exposure
- c: Timers/AE Lock
- d: Shooting/Display
- e: Bracketing/Flash
- f: Controls
- g: Movie
- The Setup Menu: Camera Setup
- Format Memory Card
- Language
- Time Zone and Date
- Monitor Brightness
- Monitor Color Balance
- Virtual Horizon
- Information Display
- AF Fine-Tune
- Non-CPU Lens Data
- Clean Image Sensor
- Lock Mirror up for Cleaning
- Image Dust Off Ref Photo
- Image Comment
- Copyright Information
- IPTC
- Voice Memo Options
- Beep
- Touch Controls
- HDMI
- Location Data
- Wireless Remote (WR) Options
- Assign Remote (WR) Fn Button
- Network
- Slot Empty Release Lock
- Battery Info
- Save/Load Settings
- Reset All Settings
- Firmware Version
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Network Guide
- Warranty
245
t
To recall lens data when using a non-CPU lens:
1 Assign non-CPU lens number selection to a camera
control.
Assign Choose non-CPU lens number to a control using
Custom Setting f1 (Custom control assignment, 0 307).
2 Use the selected control to choose a lens number.
Press the selected control and rotate the main or sub-
command dial until the desired lens number is displayed in
the top control panel.
A Focal Length Not Listed
If the correct focal length is not listed, choose the closest value greater
than the actual focal length of the lens.
A Teleconverters and Zoom Lenses
The maximum aperture for teleconverters is the combined maximum
aperture of the teleconverter and the lens.
Note that lens data are not
adjusted when non-CPU lenses are zoomed in or out.
The data for
different focal lengths can be entered as separate lens numbers, or the
data for the lens can be edited to reflect the new values for lens focal
length and maximum aperture each time zoom is adjusted.
Main command dial
Focal length Maximum aperture
Lens number