Owner's Manual

46
If you have previously connected to
a network, you can disconnect or
reconnect at the push of a button
by using Custom Setting f1 (Custom
control assignment, page 6) to as-
sign Connect to network to the Fn1,
Fn2, Fn3, or Pv button. Pressing the selected button will dis-
play a network connection dialog.
Quick Network Connection
The Network Indicator
Connection status is shown by the
network indicator on the back of the
camera. This contrasts with earlier
cameras, which showed connection
status in the network menu only.
Network indicator Status
K (lights green) Waiting for connection.
H (flashes green) Connected.
H (flashes amber) Network error.
I (off)
Network connection disabled or Ethernet cable
not connected.