Owner's Manual

Table Of Contents
11
6 Obtain or select an IP address.
Highlight one of the following options
and press J.
Obtain automatically: Select this option if
the network is configured to supply the
IP address automatically.
Enter manually: When prompted, enter an IP address and
subnet mask by pressing 4 and 2 to highlight segments
and 1 and 3 to change. Press J to proceed when entry is
complete.
7 Choose your next step.
The IP address will be displayed; press J. Your next step
depends on the connection type selected in Step 4 on page 9:
If you chose Image transfer or Camera
control, pair the camera and computer as
described on page 12.
If you chose HTTP server, proceed to Step 8.
A Routers
Connection to computers on other networks via a router is not
supported.